Detail Guys only use leading Ceramic Coating Products including Autoglym and Gtechniq.
We ensure that you receive the best ceramic coating products available for your vehicle and application. Your vehicle required a mini-detail before we can apply any ceramic coating.
Firstly, your vehicle is sprayed with Autoglym PH Neutral snow foam and left to soak, this will start to break down dirt contaminants on the paint.
Your vehicle is then pressure washed to rinse off the snow foam and majority of dirt will be removed to minimise swirl marks when washed.
Using a separate bucket, door shuts, and wheel arches are then cleaned, along with the alloys and insides of wheels which are cleaned with acid-free wheel cleaner.
Liquid decontamination and rinse.
Next, there is a multi-stage two bucket wash using a wash mitt, each panel is washed with PH neutral shampoo, the mitt is then rinsed between panels in a clean bucket of water with a grit guard to minimise paint damage.
The vehicle body work then goes through a Clay Bar/Mitt process to remove any road tar, and other hard contaminants that could not be removed during the wash stages.
Your vehicle is then rinsed and dried using Soft plush micro-fibre towels and hot air blower.
Now your vehicle is prepped for is stage 1 Machine polish that brings your paintwork back to its original showroom shine. (If your vehicle has light scratches / swirl marks, please mention them when placing your order as you may need a 2-3 stage machine polish to remove them).
Panel wipe is used to clean the surface of your paintwork to wipe away any excess compounds, polishes, wax, oils, and other contaminants.
Gtechniq Crystal Serum (Ceramic) is applied.
Gtechniq XO (Hydrophobic Layer) is applied.
Finally interior / exterior glass is cleaned, and tyres are dressed.
